Precision Ceramic Pin Round Gauge – HY Manufacturing
The ceramic pin gauge has longer life cycle than steel pin gauge, and the ceramic is non-conducting material, so it can be in electricity fields.
Meanwhile, the ceramic pin gauge is free from corrosion, it can be handled with hands don’t require special maintenance or rust prevention treatment.
Specifications of the ceramic pin gauge
Length: 50mm or customized
Size: 0.004Inch ~1Inch
Tolerances: Min +-0.001mm
Surface: can be done precision finishing
The overall sizes can be customized.
The way to use pin gauge
1.Use pin gauge: Hold the Measured parts by left hand, hold the pin gauge by right hand, put the pin gage into the measured round hole vertically.
Attention, don’t overpower, unwise, it will damage the pin gauge
Or make the measurement data is not accurate.
2.Choose pin gauge, according to the hole diameter of the measured parts on the drawings, firstly choose the smallest pin gage within the diameter range.
For example, if the hole diameter is 3.00+0.005mm, you should choose the 2.950 pin gauge,
If the 2.950 pin gauge cannot put into the hole, please choose a smaller one.
3.The reading of the pin gauge: the precise reading is as the pin gauge show.
4. After using, the pin gauge should be in place and properly kept.